NEC PD78F9488 - Manual (Page 275)

CHAPTER 15 REMOTE CONTROLLER RECEIVER ( µ PD789489, 78F9489 ONLY)
User’s Manual U15331EJ4V1UD
275
(8) Remote controller receive DH0S compare register (RMDH0S)
This register is used to detect the high level of remote controller data 0 (short side).
RMDH0S is set with an 8-bit memory manipulation instruction.
RESET input sets RMDH0S to 00H.
(9) Remote controller receive DH0L compare register (RMDH0L)
This register is used to detect the high level of remote controller data 0 (long side).
RMDH0L is set with an 8-bit memory manipulation instruction.
RESET input sets RMDH0L to 00H.
(10) Remote controller receive DH1S compare register (RMDH1S)
This register is used to detect the high level of remote controller data 1 (short side).
RMDH1S is set with an 8-bit memory manipulation instruction.
RESET input sets RMDH1S to 00H.
(11) Remote controller receive DH1L compare register (RMDH1L)
This register is used to detect the high level of remote controller data 1 (long side).
RMDH1L is set with an 8-bit memory manipulation instruction.
RESET input sets RMDH1L to 00H.
RIN
Allowable
range
Counter value
RMDH0S register value
RMDH0L register value
Data 0
If RMDH0S ≤ counter value < RMDH0L
is satisfied, it is assumed that the high level
of data 0 has been successfully received, and
therefore RMSR receives the data.
RIN
Allowable
range
Counter value
RMDH1S register value
RMDH1L register value
Data 1
If RMDH1S ≤ counter value < RMDH1L is
satisfied, it is assumed that the high level of
data 1 has been successfully received, and
therefore RMSR receives the data.