Yamaha DME - Manual (Page 450)

Chapter 6 Component Guide
DME Designer Owner’s Manual 450
■ Crossover
Click the Speaker Processor [Crossover] button to open the crossover editor window.
Section Parameter Range Function
1 Polarity Normal/Inverted Inverts the polarity of each output channel.
2 Mute ON/OFF Mutes the output of each output channel.
This parameter is linked to the Mute setting in
the original window.
3
Frequency 20 Hz to 20 kHz Sets the crossover frequency between output
channels.
The display appears as a dotted line when
muted.
4 LPF Type Thru
6dB/Oct
12dB/Oct AdjustGc
12dB/Oct Butrwrth
12dB/Oct Bessel
12dB/Oct Linkwitz
18dB/Oct AdjustGc
18dB/Oct Butrwrth
18dB/Oct Bessel
24dB/Oct AdjustGc
24dB/Oct Butrwrth
24dB/Oct Bessel
24dB/Oct Linkwitz
36dB/Oct AdjustGc
36dB/Oct Butrwrth
36dB/Oct Bessel
48dB/Oct AdjustGc
48dB/Oct Butrwrth
48dB/Oct Bessel
48dB/Oct Linkwitz Sets the roll-off slope and filter type for each
octave.
The filter is bypassed when [Thru] is
selected.
5
Frequency 20 Hz to 20 kHz Sets the LPF cutoff frequency.
6 Gc -6 dB to +6 dB Sets the cutoff frequency gain when the
[Type] setting is [AdjustGc] (Adjustable Gc).
1
2
3
4 7
5 6 8 9
[Speaker Processor - Crossover] editor window