B&K Precision 9171-9174 - Manual User Manual
Page 160
148
GOUT/GOUT2
Description:
Configures/Queries the output state of all the power
supplies in the chain. See
OUT/OUT2 command for
similar syntax.
GOUT2 is for dual channel models only.
Example:
GOUT ON
Sets all the power supplies’ output to ON.
GOUTA
Note:
For dual channel models only.
Description:
Configures the output state of both channels of the
selected power supply.
Example:
GOUTA ON
Enables both channel outputs of all the dual channel
power supplies in the chain.
GOV/GOV2
Description:
Configures/Queries the over voltage protection value of
all the power supplies connected in the chain. See
OVSET/OVSET2 command for similar syntax. GOV2 is
for dual channel models only.
Example:
GOV 70.000
Sets all the power supplies’ OVP value to 70.000V.
GOVP/GOVP2
Description:
Configures/Queries the over voltage protection state of
all the power supplies connected in the chain. See
OVP/OVP2 command for similar syntax. GOVP2 is for
dual channel models only.
Example:
GOVP ON
Sets all the power supplies’ OVP state to ON.
GOC/GOC2
Description:
Configures/Queries the over current protection value of
all the power supplies connected in the chain. See
OISET/OISET2 command for similar syntax. GOC2 is
for dual channel models only.
Example:
GOC 3.000