B&K Precision 9171-9174 - Manual - Manual (Page 82)

70
Recall Output Settings
To recall a saved setting:
1. Press and the screen will display as follows:
For Dual Channel models:
2. Use the keypad to enter the memory location that contains
the voltage and current values to recall. The voltage and
current settings will change immediately to the recalled
settings.
Configure Power-On State
The power supply can be powered up to a last known state, which
can be useful in the case of power interruption. To configure this,
follow the steps below:
1. Press , then to enter SYSTEM SETTING. Select
POWER ON STATE. Press or to change it to LAST
RECALL =
CH1OFF
10 . 000 V 1 . 000 A
CH2OFF
10 . 000 V 1 . 000 A
RECALL =
OFF 0.000 V 0.000 A
RCL
Menu 1