B&K Precision 9171-9174 - Manual - Manual (Page 54)

42
3. To cancel this action, press with NO marked by the
cursor. To confirm resetting the instrument to factory default,
press to select YES and press .
4. After approximately 5 seconds, the instrument will
automatically jump back to the normal display. All settings
are now set back to their factory default values.
Table 3 Factory Default Settings
REMOTE USB
GPIB ADDR 1
KEY LOCK OFF
IP CONFIG STATIC
IP ADDRESS 255.255.255.255
BEEP ON
LCD BACKLIT ALWAYS ON
VOLT LIMIT MAX Max. rated voltage of model
VOLT LIMIT MIN 0.000V
CURR LIMIT MAX Max. rated current of model
CURR LIMIT MIN 0.0005A
V SLEWRATE 7.000 V/ms
I SLEWRATE 0.6000 A/ms
MEASURE AVERAGE TIME 2
LED MODE OFF
OVP SETTING OFF, SET = Max. rated voltage
of model
OCP SETTING OFF, SET = Max. rated current
of model
TIMER FUNCTION OFF
Enter
Enter