Gilderfluke&Co 'Smart' Brick Animation Control System - Manual (Page 46)

serial port. This type of echo can be used to verify that
the Smart Brick System has received all characters sent
to it. Note that since only one Smart Brick Brain in the sys-
tem is in this mode at a time, that this form of echo only
verifies the operation of this one Smart Brick Brain and no
other parts of the system.
EXAMPLE: to put Smart Brick Brain 00 into ECHO GLOBAL
mode:
e 0 0
EXAMPLE: a typing random characters ‘apiury-
hqpfnhsdflauthf’ will echo:
apiuryhqpfnhsdflauthf
“f” Exit Echo All Mode:
This command takes all Brick Brains in the system
out of ECHO ALL MODE.
EXAMPLE: to take any and all Brick Brains out of ECHO
ALL MODE:
f
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
•••••••••••••••••••••••
“g” Enter Echo Mode:
This command puts all the Smart Brick Brains in the
system into ECHO MODE. When in this mode, the char-
acters used to select all track-specific commands are
echoed by the Smart Brick Brain addressed by the com-
mand. This is the type of echo mode which best verifies
the proper operation of all the Smart Brick Brains in the
Smart Brick System.
EXAMPLE: to put Smart Brick Brain 00 into ECHO MODE:
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
36 of 178