Teledyne LeCroy WaveRunner 6 Zi and 12-Bit HRO Getting Started Manual - Manual (Page 65)

Getting Started Manual
922136-00 Rev A 57
B
an unforthcoming segment. During that time, no oscilloscope functions are
accessible. By means of a timeout value, however, the acquisition will be
completed, the waveform displayed, and control of the oscilloscope
returned to the user after the timeout has elapsed.
6. Under Display Settings, touch inside the Display mode control, and
select a sequence mode display from the pop-up menu.
7. Touch the S INGLE trigger front panel button.
Note : Once a single acquisition has started, you can interrupt the
acquisition at any time by pressing the S
INGLE front panel button a second
time or by pressing the S
TOP front panel button. In this case, the segments
already acquired will be retained in memory.
Zooming Segments in Sequence Mode
You can zoom individual segments easily using the Q UICKZOOM front panel
button. When you zoom, the zoom traces default to Segment 1. Channel
descriptors indicate the total number of segments acquired. Zoom
descriptors indicate [Seg #] and #Segments in the Zoom. You can scroll
through the segments using Z
OOM front panel position knob.
Sample Zoom of Segments in Sequence Mode
1. Touch the front panel Quickzoom button.