Watlow ANAWIN 2 - Manual (Page 106)

10-12 AnaWin User’s Guide
Using the Developer
Font Name: Click the Font Name setting to display the Font dialog box
from which you can select a font to be used for the digital I/O text
reference.
Font Size: Click the Font Size setting to display the Font dialog box
from which you can select a font size to be used for the digital I/O text
reference.
Font Bold: Click the Font Bold setting to display the Font dialog box
from which you can specify whether the digital I/O text reference will
be bold (True) or not (False).
Font Italic: Click the Font Italic setting to display the Font dialog box
from which you can specify whether the digital I/O text reference will
be italic (True) or not (False).
Alignment: Use the Alignment pull-down list box to select an alignment
for the digital I/O text reference: Left, Right, or Center.
Font Rotate (deg): Use the Font Rotate (deg) pull-down list box to
select the number of degrees you want the digital I/O text reference to
be rotated: 0 (horizontal), 90, 180, or 270. Note that only Truetype fonts
will rotate.
Bevel Size: Use the Bevel Size field to enter the size of the bevel that
surrounds the digital I/O text reference, then press Enter. If you do not
want a bevel, enter 0 in this field.
Bevel Style: Use the Bevel Style pull-down list box to select the style of
the bevel that surrounds the digital I/O text reference: Lowered or
Raised.
Text When High: Use the Text When High field to enter the text to be
displayed when the I/O point is high, then press Enter.
Text Color-Hi: Click the Text Color-Hi setting to display a color
selection dialog box from which you can select a text color to be used
when the I/O point is high.
Bkgrnd Color-Hi: Click the Bkgrnd Color-Hi setting to display a color
selection dialog box from which you can select a background color to be
used when the I/O is high.
Text When Low: Use the Text When Low field to enter the text to be
displayed when the I/O point is low, then press Enter.
Text Color-Lo: Click the Text Color-Lo setting to display a color
selection dialog box from which you can select a text color to be used
when the I/O point is low.
Bkgrnd Color-Lo: Click the Background Color-Lo setting to display a
color selection dialog box from which you can select a background
color to be used when the I/O point is low.