Watlow ANAWIN 2 - Manual (Page 113)

Using the Developer
AnaWin User’s Guide 10-19
The Overview Thumbnails screen displays thumbnails for up to a total
of 32 saved custom overview screens. Each time you save a custom
overview screen, AnaWin creates a thumbnail for it.
Up to eight thumbnails appear on the screen at a time. Use the scroll bar
to bring additional thumbnails into view. The text boxes below the
thumbnails allow you to change the names of the custom overviews
associated with the thumbnails.
Right-mouse-click on a thumbnail to display the popup window shown
in Figure 10-16.
FIGURE 10-16 Thumbnail Hot Key / Position Window
The dialog box contains two editable fields:
Use the Hot Key Assigned pull-down list box to select a hot key for
custom overview associated with the thumbnail. When you press the hot
key combination, the custom overview associated with that thumbnail
appears.
Use the Thumbnail Position pull-down list box to select the position in
which the thumbnail will appear on the Overview Thumbnails screen.
Typically, you use this feature to order the thumbnails and associated
custom overviews by function.
The Thumbnail Position field allows you to specify which custom
overview you want to appear on startup. If no alarms exist, the custom
overview screen associated with the thumbnail in position 1 appears on
startup. If an alarm exists, AnaWin displays the Alarm screen on
startup.
In addition, Thumbnail Position determines which Overview Thumbnail
screen is available from the View menu in AnaWin.
Click OK to close the dialog box and return to the Overview
Thumbnails screen.