Watlow ANAWIN 2 - Manual (Page 56)

5-16 AnaWin User’s Guide
Setting Channel Parameters
Displayed Precision: Use the Displayed Precision field to set the
number of decimal places for setpoints in a profile that will be run on a
channel with input type set to linear. Channels with TC inputs always
use a precision of -1.
Last Segment: Use the Last Segment field to enter the number of the
last segment that will be executed in the profile.
Tolerance Time-Out Period: Use the Tolerance Time-Out Period field
to enter the length of the tolerance time-out. If the PV is out of tolerance
for longer than the amount of time you specify, an alarm occurs.
Digital Output States: Use the Digital Output States pull-down list
boxes to set the event output (ON or OFF) that you want for each digital
output before the profile starts.