Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 37)

37
IM 04L31A01-02E
Resetting Program Control
Resets the program control and stops.
1. Press the RUN/RST soft key .
A pop-up window for starting and resetting program control appears.
Window for starting and
resetting program control
2. Select [RESET] using the up and down arrow keys .
3. Press the DISP/ENTER key .
Program Control Display Example
Program pattern
name display
Control pattern
number
Control segment
number
Remaining time ofthe control
segment
Operation mode
Cursor indicating the program
execution position
Preset pattern
waveform
(SP, dotted line)
PV waveform
(solid line)*
Repeat segment range
* PV waveforms are
displayed when you
press the START
key to start the data
acquisition to the
internal memory.
Repeat frequency and repeat
count values
HOLD (blinking):
Hold mode
WAIT: Wait mode
DELAY: Program pattern
control being
delayed
Displays wait time when in wait
mode
Tag/Tag comment
PV, SP, and OUT
Switch tag/tag comment display
Show the program selection display
Switch full display/split display
Hold the program
Display the window for starting program control and resetting
Advance the program
Display the ON/OFF selection menu of program pattern display loops
Soft key menu when in hold mode
Display the menu for selecting the loop of which
the target SP is to be changed
Display the window for changing the remaining segment time
Switch to control group display (style number S3 or later)
Switch to overview display (style number S3 or later)
Display the selection menu for the event display method
(style number S3 or later)
Turn the event display ON/OFF(style number S3 or later)
Soft key menu 2/2
Switching between Program Control and Local Control for Each Loop
Press the PRG/LOC soft key on the control group screen to switch between program
and local.
Program Control Function (/PG1 and /PG2 Options)