Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 59)

59
IM 04L31A01-02E
List of Parameters
#6 Time
Parameter Selectable Range or Selections Initial Value
Time set > YY/MM/DD HH/MM/SS – –
#7 Math set1 (expression, alarm, constant)
Parameter Selectable Range or Selections Initial Value
First-CH 31 to 60 31
Last-CH 31 to 60 31
Math range > Math On/Off On/Off Off
Math range > Calculation expression 40 characters or less. 01
Math range > Span Lower –9999999 to 99999999 (decimal point: within 4 digits to –200.00
the right of the decimal point)
Math range > Span Upper –9999999 to 99999999 (decimal point: within 4 digits to 200.00
the right of the decimal point)
Math range > Unit Up to 6 alphanumeric characters –
Alarm > 1 to 4 On/Off Off
Alarm > Type H, L, T, or t H
Alarm > Value Value within the measurement span 0.00
Alarm > Relay On/Off On/Off Off
Alarm > Relay Number I01 to I06, DO001 to DO006, DO101 to DO106, I01
DO201 to DO206, RO001 to RO012, or SW001 to SW036
Alarm > Detect On/Off On
Constant > K01 to K30 –9.9999E+29 to –1.0000E–30, 0, 1
1.0000E–30 to 9.9999E+29
#8 Math set2 (tag, TLOG, rolling average, alarm delay)
Parameter Selectable Range or Selections Initial Value
First-CH 31 to 60 31
Last-CH 31 to 60 31
Tag > Tag Up to 16 alphanumeric characters 31
TLOG > Timer No. 1, 2, or 3 1
TLOG > Sum scale Off, /s, /min, or /h Off
Rolling average > On/Off On/Off Off
Rolling average > Interval 1 s, 2 s, 3 s, 4 s, 5 s, 6 s, 10 s, 12s, 15s, 20s, 30s, 10 s
1 min, 2 min, 3 min, 4 min, 5 min, 6 min, 10 min, 12 min,
15 min, 20 min, 30 min, or 1 h
Rolling average > Number of samples 1 to 64 1
Alarm delay 1 s to 3600 s 10 s
#9 Batch set
Parameter Selectable Range or Selections Initial Value
Application name Up to 16 alphanumeric characters –
Supervisor name Up to 16 alphanumeric characters –
Manager name Up to 16 alphanumeric characters –
Batch number Up to 16 alphanumeric characters –
Lot number Up to 4 alphanumeric characters –
Auto increment On/Off On
Disp information Batch, Time Batch