STI SS-2402E - Manual (Page 2)

Installation and Service Instructions
STOPPER STATION SERIES 2000 PUSH BUTTON
SAFETY NOTICE TO INSTALLERS AND USERS
INSTALLATION NOTE: This push button has been tested according to UL2017. It is important
to read, understand and follow all instructions provided with this product. Non-fire alarm initiating
devices are listed in UL category UEHX. It is the installer’s responsibility to comply with NFPA72
and 101, NEC, mounting specifications according to ADA and other applicable fire and electrical
codes. To avoid electrical shock, DO NOT attempt to install this product when power is on. To
avoid possible confusion with fire alarm initiating devices, do not mount a red stopper station
near a manual fire alarm initiating device. ADA mounting compliance requires the operable part
of the initiating device shall not be less than 1.1m (3 1/2 ft.) or greater than 1.37m (4 1/2 ft.)
above finished floor service. After installation and testing are complete, provide a copy of this
manual to all personnel responsible for testing and maintenance of this product.
II. CONTENTS LIST
QTY. DESCRIPTION
1 Button and Switch Assembly
1 18061 Reset Key
1 19001 Allen Head Screw #8-32 x 3/8 in.
1 19015 Allen Wrench 3/32 in.
4 19068 Screw 3.5mm x 13mm
2 19060 Screw #6-32 x 1 in.
1 19021 Ground Screw
4 19039 #6 x 1 1/4 in. SS SMS
4 19018 Plastic Screw Anchor
1 71100A Surface Backbox
- 1 -
I. GENERAL
Product Dimensions See page 7
Switch Rating SS-2XX5/LTUL MODELS, FORM C CONTACTS ON TIMER,
RATED 30 VDC 3A
III. INSTRUCTIONS
Housing Removal ...................................................................... Page 2
Backbox Preparation ................................................................ Page 3
Wire Connections ...................................................................... Page 4
Installation ................................................................................ Page 5
Key Reset Procedure.................................................................. Page 6
Product Dimensions .................................................................. Page 7
Warranty .................................................................................... Page 7
2 Form C contacts
125/250 VAC, 10 A, 1/2 HP
30 VDC, 6 A