LumaSense Technologies INNOVA 1412i User Manual
Page 29
Chapter 3
______________________________________________________________________
_____________________________________________________________________________
BE6025-15
1412i Photoacoustic Gas Monitor
LumaSense Technologies A/S
Page 29 of 202
3. To select the ENVIRONMENT branch, press S3. The text is
displayed.
4. To select the AUTO flushing mode, press S1. The following text is
displayed.
This branch does not divide again. At this stage you are able to
define the parameters in this branch of the tree using the direction
push-buttons.
If the branch had divided again, it is a simply process of using the
correct “select” push-button to continue down the desired branch.
Parameters that are already selected are displayed either with a
cursor under the current selection or the value is displayed on the
top line.
When the correct value or parameter is already selected, you can
continue on through the tree using the ▼direction push-button.
To exit SET-UP mode press SET-UP
Defining parameters is covered in
SELECT SET-UP BRANCH
MONITORING TASK ENVIRONMENT
SELECT FLUSHING MODE
AUTO FIXED TIME
LENGTH OF SAMPLING TUBE 00.00 m
PRESS ENTER TO CHANGE VALUE