LumaSense Technologies INNOVA 1412i - Manual (Page 88)

Chapter 7
______________________________________________________________________
_____________________________________________________________________________
BE6025-15 1412i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 88 of 202
The number appearing on the screen will be a number from 1 to
10.
4.
Press ¿ and use the direction keys to change the monitoring
task number to the desired value. Then press ¿ again to accept
the task number.
The following text appears on the display screen:
5. To start the measurement immediately, press S1.
To delay the start, press S2.
The following warning then appears on the display:
1. Press S1.
Delayed Start
If you selected a delayed start, the following text is displayed:
Use the direction push-buttons to enter the desired date and start
time, e.g. 10 16:25. The following text is displayed.
ACTIVE TASK : MONITORING TASK NUMBER 1
START TASK DELAYED TASK CHANGE TASK
WARNING : DISPLAY MEMORY WILL BE DELETED
PROCEED STOP
START TIME : 1 00 : 00
PRESS ENTER TO CHANGE VALUE
ACTIVE TASK : MONITORING TASK NUMBER 1
TASK WILL START AT : 10 16 : 25 TIME 16 : 00