KYORITSU 6310 Instruction Manual - Manual (Page 219)

KEW6310 11.3.3 Power quality – Saving procedure (Transient measurement)
KEW6310
11.14
11.3.3 Data Saving
Saving Procedure
1 Press the F1 Key first.
2 Press the F4 Key to check Wiring, Measurement and Save Settings.
* Pressing down the F1 Key for 2 sec or more skips step 2 and start data saving.
For further details of Basic, Measurement and Save Settings, refer to “Section 4 Settings” in this
manual. Terminals to be used in these measurements are VN and V1 only.
Wiring check
Measurement
Setting
Save Setting