HP XP Continuous Access Software - Manual (Page 62)

62 Continuous Access XP for the XP1024/XP128
Figure 35 Add RCU pane used for configuration in Figure 34
Adding and deleting logical paths for RCUs (Add Path/Delete Path)
Use the Add Path and Delete Path commands to add and delete paths for an RCU. When the Add Path
command is selected, the Add Path pane appears.
Figure 36 Add Path pane
The MCU-RCU Path field includes:
• MCU Port: MCU port number. The Initiator and RCP are listed in the drop-down list and can be
selected.
• RCU Port: RCU port number. The RCU Target port must be specified.
• Link Address: Link address (serial only). Destination port address on the ESCD (00-FD, 00 for static link
to RCU).