HP StorageWorks XP10000 Disk Array - Manual (Page 148)

• Configuration definition(s) (see “ Configuration Definitions ” on page 149)
• Comments (see “ Comments ” on page 150)
Spreadsheet Declaration
The spreadsheet declaration is required, and is written at the beginning of the spreadsheet. Certain parts
of the declaration will have already been written in the exported current spreadsheet. If the declaration
line is incorrect, an error occurs and the spreadsheet file will be rejected.
NOTE:
The spreadsheet declaration line is not case-sensitive.
• Format (variables are shown in italics):
#!Version Version number,Program Product,Process mode
• Example:
#!Version 04_00_00,LUN,Change
Table 18 describes the spreadsheet declaration components.
Table 18 Spreadsheet Declaration Components
Component Description
#! Indicates the declaration line. Cannot be changed.
Version Indicates that the Remote Method Invocation (RMI)
version number follows. Cannot be changed.
(One byte space) Required between the version and the version
number.
Version number RMI version number.
, (comma with no spaces) Follows the RMI version number
Product Indicates the required product. LUN indicates LUN
Manager.
, (comma with no spaces) Follows the program product
Process mode Indicates the required process mode. The only
mode that is currently available is Change, which
indicates adding, changing, or deleting. When the
downloaded spreadsheet file is opened, the process
mode is not yet stated.
Function Tags
Before you write the settings, you need to state the function of the parameter. This is called a function tag,
and is formatted as a string that is in brackets ([ ]). The type and order of the function tag are determined
by the product. Function tags have the following characteristics:
• At least one function tag is required in a spreadsheet.
• The function tag must be written at the very beginning of the row.
• If a function tag is already on the current spreadsheet and does not need to be changed, it must
be deleted from the new spreadsheet so it is not processed. If the function tag remains in the
spreadsheet, and no new settings for the tag are written, the settings are processed as deleted.
[CHA], [Port] and [LDEV] tags do not support a delete operation, so if no new setting is written
for these functions an error occurs.
• Any other comments and settings written in the same row as the function tag are ignored.
148 Configuration File Loader