HP StorageWorks XP10000 Disk Array - Manual (Page 60)

NOTE:
You can only select one option at a time using this method. The line for the selected option
will be highlighted.
5. In the Key Code box, enter the license key code. To install multiple options at a time, see
“ Enabling XP Remote Web Console Options Using a License Key File ” on page 61. To enable options
automatically, see “ Enabling Available XP Remote Web Console Options Automatically ” on page 63.
NOTE:
You cannot copy and paste text from other applications.
6. Click Install. A confirmation message appears (see Figure 35 ).
7. Click OK to continue installing the option.
The row of the selected option changes to
blue bold italics and the Status column changes to Install.
IMPORTANT:
To implement the setting, you must click Apply.
If you want to enable another option, repeat Step 4 through Step 7 .
8. Click OK to continue installing the option.
IMPORTANT:
To implement the setting, you must click Apply.
NOTE:
A warning message will appear if you install an emergency key for an option that has
already been installed using a permanent key. The emergency key will be installed but will
expire in 30 days (see error code # 405 5503).
IMPORTANT:
Emergency keys cannot be installed over temporary keys if the temporary key has more
than 30 days remaining.
9. To apply the changes to the array, click Apply. Then click OK.
60 Installation Requirements and Procedures