HP StorageWorks XP10000 Disk Array - Manual (Page 30)

Table 6 XP12000/XP10000/SVS 200 Disk Ar. XP Rem. Web Cons. Client Reqmts.
— HP-UX & Linux
Item Requirements for HP-UX® Requirements for Red
Hat® Linux®
Operating System HP-UX® 11.0 or 11i HP-UX® 11.23 (IA-64) or
HP-UX 11.23PI and HP-UX
11.31
Red Hat® Enterprise
Linux® AS Version 2.1
and 4.0
Processor (CPU) 600 MHz PA-8000 Itanium® 2 Pentium® III 600 MHz or
greater
Memory (RAM) 512 MB or greater 512 MB or greater 512 MB or greater
Available hard drive
space
150 MB or greater 150 MB or greater 150 MB or greater
Monitor Resolution: 1024 x 768
or greater
Resolution: 1024 x 768
or greater
Resolution: 1024 x 768
or greater
Keyboard & mouse You cannot use the mouse
wheel feature.
You cannot use the mouse
wheel feature.
You cannot use the mouse
wheel feature.
Ethernet LAN card for
TCP/IP network
100BASE-T
1000BASE-T 100BASE-T
1000BASE-T 100BASE-T
1000BASE-T
Java Runtime
Environment™
RTE 1.4.1_07, 1.4.2 with
Mozilla 1.4
RTE 1.4.2_05 with
Mozilla 1.6
RTE 1.4.2_08 with
Mozilla 1.7.3
RTE 1.4.2_08, 1.5.0_03
with Mozilla 1.7.8.00
RTE 1.4.1_07, 1.4.2 with
Mozilla 1.4
RTE 1.4.2_05 with
Mozilla 1.6
RTE 1.4.2_08 with
Mozilla 1.7.3
RTE 1.4.2_08, 1.5.0_03
with Mozilla 1.7.8.00
RTE 1.4.2_10, 1.5.0_07
with Mozilla 1.2.1
RTE 1.4.2, 1.5.0_07 with
Mozilla 1.2.1
Setting up the XP Remote Web Console
Configuring Your Web Browser
Your HP account support representative will install the SVP software and LAN cabling. You will need to
document the serial numbers and IP addresses or host names of each array because these numbers are
required for XP Remote Web Console operations.
NOTE:
It is important to verify that you have a unique IP address or host name for each SVP, to avoid any
conflicts. If a conflict occurs, obtain a unique IP address or host name for the desired array. You can also
contact your HP account support representative for assistance in assigning IP addresses or host names.
30 Installation Requirements and Procedures