HP StorageWorks XP10000 Disk Array - Manual (Page 69)

4. Select a product from the product list to allocate the license to a SLPR.
5. The Partition Status list (see Figure 41 ) and the Setting box are displayed (see Figure 42 ). Select an
SLPR.
6. Enter the allocating capacity or select Enable in the Setting box.
7. Click Set. The contents of the setting appear in the Remaining Capacity and Partition Status lists.
Make additional settings, if desired, using the above instructions.
8. Click Apply to implement the setting, or click Cancel.
HP StorageWorks 69