HP EVA P6000 Storage - Manual (Page 192)

Table 27 Error Messages (continued)
How to correct Meaning Status code value
Remove an adapter connection before
attempting the command again. The system has reached the limit of client
adapters, so the command attempted cannot
add another. 165
Too Many Port WWNs
Retry the command with an accurate
port WWN. The port WWN supplied with the command
is not correct. 166
Port WWN Not Found
Retry the command with an accurate
virtual disk identifier. The virtual disk identifier supplied with the
command is not correct. 167
No Virtual Disk For Presented
Unit
Retry the command with an accurate
client identifier. The client identifier supplied with the
command is not correct. 168
No Client For Presented Unit
Either the data replication destination
is a different version that does not The command is not supported. 169
Unsupported
support the command, or the
command is only executable by
product support.
Report the error to product support. This is an internal error. 170
SCS Operation Failed
Remove members from group and retry
operation. Operation cannot be completed because it's
group has members. 171
Has Members
Report the error to product support. This error is no longer supported. 172
Incompatible Preferred Mask
Retry operation with more available
drives. Not enough volumes have been selected for
creation of a disk group or addition to a
disk group. 173
Too Few Volume Tags
Report the error to product support. This error relates to the ILF product support
feature. 174
ILF Debug Flag Not Set
Report the error to product support. The drive is not valid for the specified
command. 175
Invalid Physical Object Identifier
Add more disks to the array and retry. There are not enough available drives to
create the requested storage cell. 176
Too Few Drives
Add more disks to the tag list and
retry. Supplied tag list contains fewer than the
minimum required number of drives. 177
Too Few Physical Store Tags
Report the error to product support. This is an internal error. 178
Unexpected SCS Error
Case 1: Remove the unsupported drive
and retry operation. Case 1: A physical disk whose capacity is
larger than the maximum supported physical
disk capacity was detected. 179
Unsupported Capacity
Case 2: Retry the shrink operation,
leaving the minimum supported virtual
disk space in the virtual disk.
Case 2: A shrink operation on an existing
virtual disk would shrink the virtual disk
beneath the minimum supported virtual disk
capacity.
Case 3: Retry the operation using a
smaller, supported capacity.
Case 3: An expand operation on an existing
virtual disk or the creation of a new virtual
disk results in a virtual disk larger than the
maximum supported virtual disk capacity.
Report the error to product support. This error is no longer supported. 180
Insufficient Memory
Add more drives of the requested type
or change the requested drive type. There were not enough available drives of
the requested type to complete the
operation. 181
Insufficient Drive Type
192 Error messages