HP EVA P6000 Storage - Manual (Page 297)

Table 35 iSCSI or iSCSI/FCoE module log messages (continued)
Left PCM is connected AC power. Info User sysTempMon: Power for Left
PCM Plugged-in
152133
Left PCM is not connected to AC power
(unplugged). Info User sysTempMon: Power for Left
PCM Un-plugged
152134
Right PCM is connected AC power. Info User sysTempMon: Power for Right
PCM Plugged-in
152135
Right PCM is not connected to AC power
(unplugged). Info User sysTempMon: Power for Right
PCM Un-plugged
152136
Left PCM (#1) is reporting a faulty fan. Info User sysTempMon: Slot 1 (R1) PCM
Fan%d faulty
152137
Left PCM (#1) is reporting a healthy fan. Info User sysTempMon: Slot 2 (R2) PCM
Fan%d faulty
152138
Right PCM (#2) is reporting a faulty fan. Info User sysTempMon: Slot 1 (R1) PCM
Fan%d healthy
152139
Right PCM (#2) is reporting a healthy fan. Info User sysTempMon: Slot 2 (R2) PCM
Fan%d healthy
152140
Module has detected an over temperature, Front:
%dC
Rear: %dC CPU1: %dC CPU2: %dC.
Info User sysTempMon: Over Temperature
Front: %dC Rear: %dC CPU1:
%dC CPU2: %dC
152141
Fan(s) speed has been set to high. Info User sysTempMon: Setting the fan
speed to high
152142
Fan(s) speed has been set to normal. Info User sysTempMon: Setting the fan
speed to normal
152143
Module temperature has returned to normal
operating range, Front: %dC Rear: %dC CPU1: %dC
CPU2: %dC. Info User sysTempMon: Temperature back
to safe value. Front: %dC
Rear: %dC CPU1: %dC CPU2:
%dC
152144
Module has reached a critical temperature ad is
shutting down, Front: %dC Rear: %dC CPU1: %dC
CPU2: %dC. Info User sysTempMon: Critical
Temperature, Shutting Down
Front: %dC Rear: %dC CPU1:
%dC CPU2: %dC
152145
A GE port (eth#%d) has invalid NVRAM
parameters. Fatal TOE QL3022:ql3xxx_probe: Adapter
eth#%d, Invalid NVRAM
parameters
200721
Uncorrectable memory error detected at address
provided in log message. Fatal System "memory monitor: Detected
Uncorrectable Ecc %08lx
233473
system is rebooting in 5
secs\n"
Attempt to register the interrupt handler failed. Fatal System "Failed to register
interrupt handler!\n"
233474
Failed class_simple_create system call from
memory monitor initialization routine. Fatal System "%s class_simple_create
failed\n"
233475
Failed to kill system task. Error System "Failed to kill sys killer
%d\n"
237572
Module temperature has exceeded the high
temperature threshold. Error System Temperature over high
threshold %d
237573
Module temperature has returned to the normal
operating range. Info System Temperature is back to
normal range %d
249862
297