HP XP Continuous Access Software - Manual (Page 201)

201
Floatable Host
When using the –f option, this item displays the first 30
characters of the host name (ip_address) described in
the configuration definition file. The –f option
interprets the host name as utilizing a floatable IP for
the host.
HORCM_ver When the –l option is specified, this shows the version
of the CA of the local host. When the –r option is
specified, this item shows the version of the CA on the
remote host for the specified group.
Uid Shows unit ID of the disk array connected to the local
host when the –l option is specified. If the –r option is
specified, the information is for the disk array
connected to the remote host.
Serial# Shows the production serial number of the disk array
connected to the local host when the –l option is
specified. If the –r option is specified, the information
is for the disk array connected to the remote host.
Micro_ver Shows microcode version of the disk array connected to
the local host when the –l option is specified. If the –r
option is specified, the information is for the disk array
connected to the remote host.
Cache(MB) Shows logical cache capacity (in MB) in the disk array.
When the –l option is specified, the cache capacity is
for the local disk array. When the –r option is specified,
the cache capacity shown is for the remote disk array.
Display Example
# raidqry -l
No Group Hostname HORCM_ver Uid Serial# Micro_ver Cache(MB)
1 --- HOSTA 01-00-03/03 0 30053 52-35-02/02 256
1 --- HOSTA 01-00-03/03 1 30054 52-35-02/02 256
# raidqry -r oradb
No Group Hostname HORCM_ver Uid Serial# Micro_ver Cache(MB)
1 oradb HOSTA 01-00-03/03 0 30053 52-35-02/02 256
2 oradb HOSTB 01-00-03/03 0 30053 52-35-02/02 256
1 oradb HOSTA 01-00-03/03 1 30054 52-35-02/02 256
2 oradb HOSTB 01-00-03/03 1 30054 52-35-02/02 256
# raidqry -l -f
No Group Floatable Host HORCM_ver Uid Serial# Micro_ver Cache(MB)
1 --- FH001 01-00-03/03 0 30053 52-35-02/02 256