HP StoreEver ESL G3 Tape Libraries - Manual (Page 147)

16. To see the results for a previous test, select the test name in the Test Results area of the window,
then click Reports. The LMC saves the most recent five test results.
17. When you are finished working with the test results, click Close to close the result window.
18. If you are finished performing verification tests, click Close to close the Verification Tests
window.
Partial tests
To perform partial tests:
1. Log on as an administrator.
2. Ensure that you are viewing the physical library. From the View menu or in the Managed
Views area of the LMC, select the name of the physical library.
3. Select Tools
→Library Diagnostics→Verification Tests.
4. On Verification Tests, click Partial from the Select Test drop-down list.
5. From the Select Sub-test drop-down list, click either Frame or Configuration or both. A check
mark indicates that the test is selected.
6. Click Start.
7. If prompted to take the library offline, click Yes.
Working with verification tests 147