HP StoreEver ESL G3 Tape Libraries - Manual (Page 66)

c. Type an appropriate value into the Name field.
d. Select the operating system of the host from the Type field pull-down menu.
e. Type the port number into the Port field.
f. Type the world wide path name into the WWPN field.
The string must be 8 hexadecimal numbers, a colon (:), and 8 hexadecimal numbers
(########:########).
g. Click Finish to create the host.
h. Click OK in the The Host was created successfully dialog box.
6. To modify an existing host:
a.
Click the radio button to select Modify Host.
b. Click to appropriate box in the Select column to select the host to modify.
c. Click Next to access the Modify Existing Host dialog box, which displays current
information for the host.
d. Correct the information in the Name, Type, Port, and WWPN fields.
e. Click Finish to save the modifications.
f. Click OK in the The Host was modified successfully dialog box.
7. To delete an existing host:
a.
Click the radio button to select Delete Host.
b. Click to appropriate box in the Select column to select the host to delete.
c. Click Next to access the Modify Existing Host dialog box, which displays current
information for the host.
d. Click Finish to delete the host.
e. Click OK in the The Host was deleted successfully dialog box.
8. If necessary, click Cancel then Yes to exit the dialog box.
Using the Access Group Configuration option
To create or delete access control groups, or to add hosts to groups or remove hosts from groups,
use the Access Group Configuration option. To do so:
1.
Select Setup
→Secure Manager to display the Secure Manager Configuration Wizard.
2. Click Next.
3. Click the radio button to select Access Group Configuration.
4. Click Next to display the Welcome to the Host Access Group Configuration Wizard screen.
5. Click Next.
6. To create a new group:
a.
Select the Create New Host Access Group radio button.
b. Click Next to display the Select Group Access Name dialog box.
c. Type the appropriate value into the Group Name field.
d. Click Next.
e. Select the box in the Select column to indicate which host or hosts to include in the group,
or select the Select All Hosts box to include all of the hosts in the group.
f. Click Next to display the Select the drives for host access dialog box.
g. Select the box in the Select column to indicate which drive or drives on the selected hosts
to include in the group.
h. For each drive selected, also select the appropriate box in either the Port A or Port B
columns to indicate which port to use. (The default is Port A.)
i. Click Next to display the Select the partitions for host access dialog box.
j. Select the box or boxes in the Select column to indicate which partitions to configure for
host access.
66 Modifying the library configuration