HP StoreEver ESL G3 Tape Libraries - Manual (Page 164)

3. To filter by partition, do the following in the SSE Source Filter area of Sift Sort Export:
a.
Select a Partition from the drop down list.
b. To use an additional filter, in the Media Filter field, type the search string, and click Filter.
For example, to filter all media containing the character 8, type *8*. This field is case
sensitive. The appropriate media appears in the Select SSE Media section below.
4. Optionally, in the Barcode File Selection section, you can filter by using a user-supplied file
(that lists barcodes):
a.
Click Browse to locate the appropriate file.
b. Click Enable File Filter to instruct the interface to filter out barcodes contained in that file.
If the barcodes in that file do not belong to the particular partition selected, those barcodes
are highlighted in red in the Select SSE Media section and are not selectable.
5. Once you have selected media to sift sort, in the SSE Starting Slot Destination area, click
Explorer to select a coordinate location graphically by clicking on a cell.
164 Maintaining the library