Nikon Laser - Manual (Page 7)

12
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
13
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
Internal display
1．『 』-Target aiming/Laser irradiate system
『 』- Aim at the target. Position the target at the center of the reticle.
『 』- Appears while the laser is being used for a measurement.
(Remains present during single measurement. Blinks during continuous measurements.)
Warning: Do not look into the objective lenses when this mark is shown.
2. Upper 4-digit
Lower 3-digit
<Examples of measurement results>
Upper 4 digits:
Display of results: ( ＜ 1,000 meters(yards))
e.g. Actual distance: 234.5 meters = 『 』
e.g. Horizontal distance/Slope adjusted distance: 222.2 yards = 『 』
Display of results: ( ≧ 1,000 meters (yards)) e.g. 1,065 yards = 『 』
Lower 3 digits:
Actual distance
Display of results: ( ＜ 999 meters (yards)) e.g. 235 meters = 『 』
Display of results: ( ≧ 1,000 meters (yards)) 『 』
Height
Display of results: ( ＜ 99.8 meters (yards)) e.g. Downward 67.8 meters = 『 』
Display of results: ( ＜ 100 - 999 meters (yards)) e.g. Upward 235 meters = 『 』
Display of results: ( ≧ 1,000 meters (yards)) 『 』
『 』- Now measuring
『
』- Failure to measure or unable to measure distance
3. 『 』Display units
『 』Indicates distance being measured in meters.
『 』Indicates distance being measured in yards.
4. 『 』Indicates battery condition. (See "Changing Batteries")
5.
『
』
Measurement/display modes display
A. Actual Distance and Height Mode
Upward Downward
Measure and display the actual distance to your target.
Upper 4 digits: Actual distance, Lower 3 digits: Height
B. Horizontal Distance and Height Mode
Upward Downward
Calculates the horizontal distance to your target by measuring actual distance and angle, and
displays the results.
Upper 4 digits: Horizontal distance, Lower 3 digits: Height
C. Golf Mode
Up-slope Down slope
Calculates the slope adjusted distance to your target by measuring actual distance and angle,
and displays the results.
Upper 4 digits: Slope adjusted distance, Lower 3 digits: Actual distance
Slope adjusted distance = (Horizontal distance ± Height)
D. Actual Distance Mode
No symbol Measure and display the actual distance to your target.
Upper 4 digits: Actual distance, Lower 3 digits: No display
Digitally indicates measured distance in meters (yards). Also indicates
measuring status such as “Measurement in progress”, “Measurement
unsuccessful” or “Unable to measure.”