Konica Minolta bizhub 751 - Manual (Page 9)

Foreword 1
Setup Utility for RightFax 1-4
1.3 General operation
Follow the procedure described below to specify the settings for the Right-
Fax server.
2
Reminder
For details on the setup and operating procedures for the RightFax serv-
er, refer to the manual for the RightFax server. For details on the setup
procedure so that the multifunctional peripheral can link with the Right-
Fax server, refer to the manual for the multifunctional peripheral.
General operation
The Setup Utility for RightFax is software used to manage multifunctional pe-
ripherals. The Setup Utility for RightFax should be used by the administrator
of a multifunctional peripheral to specify settings for the RightFax server.
Before performing the operation, check for the following.
0 The RightFax server is running.
0 A MFP module is installed on the RightFax server.
1
Install the Setup Utility for RightFax onto your computer.
– “Installing the Setup Utility for RightFax” on page 2-1
2
Start up the Setup Utility for RightFax, edit the RightFax server settings,
and then write the edited settings to a multifunctional peripheral.
– “Writing an application to a multifunctional peripheral” on page 3-1
3
Obtain information from the RightFax server, if necessary.
– “Retrieving the job history” on page 7-1 and “Writing an address
book to a multifunctional peripheral” on page 8-1