Konica Minolta Bizhub 215 - Manual (Page 114)

bizhub 215 6-27
6.8 COPY SETTING 2 6
6.8 COPY SETTING 2
<Items of COPY SETTING 2>
No. Settings Settings
1 [COPY PRIORITY] Select how to select copy mode when you turn on the power or reset
the settings from [AUTO PAPER SELECT], [AUTO ZOOM], and
[MANUAL].
•
The factory default is [AUTO PAPER SELECT].
2 [OUTPUT PRIORITY] Select finishing mode priority when you turn on the power or reset the
settings from [NON-SORT], [SORT], and [GROUP].
•
The factory default is [NON-SORT].
3 [CRISSCROSS MODE] Specify [ON] or [OFF] for alternate output if the conditions for alter-
nately outputting paper are satisfied.
•
The factory default is [ON].
4 [4IN1 COPY ORDER] Select the copy order in 4in1 mode from the two options shown be-
low.
[PATTERN1] [PATTERN2]
• The factory default is [PATTERN1].
5 [MIXED ORIGINAL] Specify whether to select the mixed original mode when you turn on
the power or reset the settings.
This item is available if the optional ADF is installed.
•
The factory default is [OFF].
6 [ORIG. DIRECTION] Select the origin direction from [TOP], [LEFT], [RIGHT], and
[BOTTOM].
•
The factory default is [TOP].
7 [BOOK SEPARATION] Select the print finishing mode in the book separation copy mode
from [OFF], [SEPARATION], and [SPREAD].
•
The factory default is [OFF].
8 [STAMP] Select the stamp printing mode from [OFF], [PAGE NUMBER],
[DATE&TIME], and [PAGE+D&T].
•
The factory default is [OFF].
9 [PAGE FORMAT] Select the [PAGE NUMBER] format to be printed in the stamp print-
ing mode from [P001,P002] and [1,2,3].
•
The factory default is [P001,P002].
10 [DATE&TIME FORMAT] This item is available if the optional Image Controller IC-209, Net-
work Card NC-504, or FAX Kit FK-510 is installed.
Select the [DATE&TIME] format to be printed in the stamp printing
mode from [MM/DD/YY], [DD/MM/YY], and [YY/MM/DD].
•
The factory default is [MM/DD/YY].
1 2
3 4
1 3
2 4