2 extended operation panel mk-733 (option), Extended operation panel mk-733 (option) -11 – Konica Minolta Bizhub 215 User Manual
Page 20
bizhub 215
2-11
2.3
Control Panel
2
2.3.2
Extended Operation Panel MK-733 (Option)
For details on using Extended Operation Panel MK-733, refer to [User's Guide Fax Operations] or [User's
Guide Network Scan Operations].
No.
Name
Functions
Page
1
Fax
Press this key to switch to the fax mode.
The lamp lights up green when the machine is in the
fax mode.
−
2
Scan
Press this key to switch to the scan mode.
The lamp lights up green when the machine is in the
scan mode. (This function is only available when Net-
work Card NC-504 or Image Controller IC-209 is
installed.)
−
3
Copy
Press this key to switch to copy mode. The lamp
lights up green when the machine is in copy mode.
−
4
Auto RX Indicator
Lights up green when the machine is set in Auto RX
mode.
−
5
Memory TX
Press this key to configure a memory transmission.
This lamp lights up green when the Memory TX mode
is set to ON.
−
6
On Hook
Press this key to set the machine in the state where
the phone is taken off the hook. Repressing this key
returns to the state to hang up.
−
7
Redial/Pause
•
Press this key to redial the last recipient you
called.
•
This function is available during the wait time to
make a call from an extension line to an external
line, or to receive information from an information
service.
−
8
Speed Dial
Press this key to dial a fax number that has been pre-
registered in the speed dial.
−
9
AddressBook
Press this key to display the information registered in
the one-touch dial, group dial, and speed dial.
−
10
Switching Plate
Use this plate to switch One-Touch Dial Key num-
bers. When the Switching Plate is closed down-
ward, one-touch dial keys 01 to 16 are available.
When it is opened upward, one-touch dial keys 17 to
32 are available.
−
11
One-Touch Dial Key
•
Press this key to dial a pre-registered destination.
•
Use keys 01 to 32 to configure one-touch dial
key and group dial settings.
•
Use keys 29 to 32 to configure program dial set-
tings.
−