5 loading envelopes into the bypass tray, Loading envelopes into the bypass tray -12 – Konica Minolta Bizhub 215 User Manual
Page 55
Advertising
bizhub 215
4-12
4.4
Manually making copies
4
4.4.5
Loading envelopes into the Bypass Tray
Up to 10 envelopes can be loaded into the Bypass Tray.
NOTICE
When loading envelopes, expel air from the envelopes, then hold the folds of the envelopes.
If air is left or the folds are not held firmly, they get wrinkled or a paper jam may occur.
If you load envelopes, set the size and type of paper on the Control Panel.
1
Load them with the flap side up, as shown in the illustration.
% Do not load the envelopes up to the point where the top of the stack is higher than the + mark.
d
Reference
For details on how to set the size and type of paper, refer to Steps 4 to 7 in page 4-14.
Advertising