JLG 3248RS/10RS Service Manual - Manual (Page 15)

SECTION 1 - SPECIFICATIONS
3121273 – JLG Lift – 1-3
Electrical System Motors
• Drive Motor
Type: Shunt Wound, Sepex 24V DC
Power: 0.65 Horsepower @ 3750 rpm
• Hydraulic Pump/Electric Motor Assembly
(All Models)
Type: Series Wound Permanent Magnet 24V DC
Power: 3kW
Travel Speed
Lift Speed
NOTE: Maximum rated load in platform on measured lift speeds. Platform fully raised and lowered.
Table 1-6. Electrical System Specifications
DESCRIPTION ALL MACHINES
Electrical System Voltage (DC) 24V - DC
Battery Charger: (1001129847)
Input:
AC Input Voltage:
Nominal AC Input Voltage:
Input Frequency:
Max. AC Input Current:
Ingress Protection:
Operating Temperature:
Output:
Nominal DC Output Voltage:
Max. DC Output Voltage:
Max DC Output Current:
Max. Interlock Current:
Protection:
Output Reverse Polarity:
Output Short Circuit:
AC Overload:
DC Overload:
85-265V AC
120VAC / 230VAC RMS
45 - 65Hz
12A - RMS @ 108V AC
IP46 NEMA4 Type 4
-22°F (-30°C) to 122°F (+50°C)
24V
33.6V
25A
1A
Electronic Protection-Auto Reset
Electronic Protection-Auto Reset
Current Limited
Current Limited
DC to AC Inverter - Output Rating:
(OPTION) 120V-AC, 60Hz - 7.5 Amps - 900
Watts - Modified Sinewave
Table 1-7. Travel Speed
MODEL
ELEVATED SPEED MAXIMUM SPEED (PLATFORM LOWERED)
UNIT OF MEASURE
Mph
Sec/25 ft
(Sec/7.6 m)
Kph Mph
Sec/25 ft
(Sec/7.6 m)
Kph
1932RS/6RS 0.3 59 - 65 0.5 2.5 6.85 - 8.5 4
3246RS/10RS 0.3 57 - 65 0.5 2.5 6.85 - 8.5 4
Table 1-8. Lift Speed
MODEL
LIFT UP
(SECONDS)
LIFT DOWN
(SECONDS)
1932RS/6RS 22 - 29 21 - 31
3246RS/10RS 55 - 65 40 - 50