JLG 3248RS/10RS Service Manual - Manual (Page 53)

SECTION 3 - CHASSIS & SCISSOR ARMS
3121273 – JLG Lift – 3-21
Drive Motor Removal
NOTICE
DISCONNECT ALL POWER BY REMOVING THE POSITIVE (+) BAT-
TERY CABLE AT THE BATTERIES BEFORE REMOVING DRIVE
MOTOR.
1. Disconnect the power cables, brake and field power
connectors from the drive motor.
2. Drain the oil out of the unit by removing the cover
plug. Note the condition of the oil, replace if neces-
sary.
3. Remove the two motor mounting bolts and washers.
4. Gently remove the drive motor (1).
NOTE: Reference Figure 3-24., Drive Motor Components for
part names and locations when servicing the Drive
Motor.
Periodic maintenance consisting of inspections of motors,
batteries and wiring circuitry is recommended, see Sec-
tion 2, Table 2-2, Preventive Maintenance & Inspection
Schedule..
CAUTION
ALWAYS WEAR EYE PROTECTION DURING ANY MAINTENANCE
OPERATION.
Figure 3-23. Electric Drive Motor Removal
1. Electric Drive Motor
2. Motor Mounting Bolts 3. Washers
1
3
2
3