JLG 3248RS/10RS Service Manual - Manual (Page 71)

SECTION 3 - CHASSIS & SCISSOR ARMS
3121273 – JLG Lift – 3-39
Figure 3-40. 3248RS/10RS - Steer Assembly
NOTE: Coat all pins with a light coat of molypaste before assembly. Pack inner and outer spindle bearings with multi-pur-
pose grease (MPG) before assembly. Do not overtighten spindle bearing nut. Replace spindle seal if worn, dam-
aged, or leaking.
1. Install the bearing with the flange surface on top of the spindle arm.
1
1