JLG E300 Service Manual - Manual (Page 186)

SECTION 6 - JLG CONTROL SYSTEM
6-18 – JLG Lift – 3121253
Table 6-2. Machine Configuration Programming Information
Configuration Digit Number Description
Default
Number
NOTE: When configuring the E300 machine, the machine configuration must be completed before any personality set-
tings can be changed. Changing the personality settings first and then changing the model number of the machine
configuration will cause the personality settings to return to default values.
1
(Model #) 1
2
3
300
400
450
1
2
(Tilt Switch) 1
2
3
4
5Deg - reduces the maximum speed of all boom functions to creep when tilted and above
elevation. Reduces drive speed to creep when tilted. Domestic and Japan
3Deg - reduces the maximum speed of all boom functions to creep when tilted and above
elevation. Reduces drive speed to creep when tilted. European and Australian
3Deg CUTOUT - drive and reduce boom functions to creep speed when tilted and above
elevation. Reduces drive speed to creep when tilted only. Option
3Deg CUTOUT BOOM - cuts out drive, telescope out, Main boom, lift up and reduces all
other boom functions to creep speed when tilted and above elevation. Option
1
Note: Any of the selections above will light the tilt lamp when a tilted condition occurs and
will sound the platform alarm when the machine is tilted and above elevation.
3
(Drive Cutout) 0
1
2
CHARGER - Battery Charger Cutout-cuts out drive when the battery charger is plugged in.
CHARGER & BOOM - Battery Charger Cutout and Simultaneous Drive and Boom Func-
tions disabled above elevation. Europe and Australia
CHARGER & ELEV - Battery Charger Cutout and Drive Cutout above elevation. Option
0
4
(Soft Touch) 0
1
NO - No Function Cutout
BOOM & DRIVE - Cuts out all functions when switch opens. Option
0
5
(JIB) 0
1
2
NO - JIB Not installed.
YES - JIB installed which has up and down movements only. Option
SIDESWING - JIB installed which has up and down movements and side to side move-
ments. Option
0
6
(Ground
Alarm) 0
1
2
3
NO - No ground alarm installed.
DRIVE - Travel alarm- Sounds when the drive function is active. Option
LIFT DOWN - Descent Alarm- Sounds when either lift down is active. Option
BOOM & DRIVE - Motion alarm- Sounds when any function is active. Option
0