ETC Cobalt Family v7.0.0 - Manual (Page 284)

282
Channel List - Select & Patch Channels
It is possible to select and patch channels to outputs directly with a Command Syntax in this list (this
does not work in At Mode).
Function Key Feedback
Select a channel [#] [CHANNEL] The channel is selected in the list
and in the Live tab.
Add a channel to
this selection [#] [+] The channel is added to the current
selection.
Add a range of
channels to this
selection [#] [THRU] The channel range is added to the
current selection.
Patch a range of
outputs to this
selection [#] [MODIFY] The output range is patched to the
current selection. A popup will
warn if outputs are in use already.
Once the current channel is patched
the next channel is auto-selected so
you can continue entering #
MODIFY, # MODIFY... to
continue patching.