ETC Cobalt Family v7.0.0 - Manual (Page 773)

771
Function Key
Start a crossfade* [GO]
Start a new crossfade during an ongoing crossfade [GO]
Pause a crossfade [PAUSE]
Crossfade to the previous step [GO_BACK]
Reverse an ongoing crossfade by making a crossfade to
the previous step [GO_BACK]
Step (without times) to the next step [SEQ+]
Step (without times) to the previous step [SEQ-]
Open the GOTO list** [GOTO]
Crossfade to any recorded preset on the stored or default
times [#] [GOTO]
Relocate the sequence from preset # in B (Next) [#] [JUMP_TO_B]
*When a crossfade is completed there is a beep.Turn this off in the System Settings - System .
**See The GOTO List
NOTE
Device parameters are executed as LTP, independent of the playback that
once started them. This means that you cannot use (for example) PAUSE to
stop attributes.