Rockwell Automation 7000 DPI Wireless Interface Module - Manual (Page 11)

Chapter
1
Getting Started
The 20-WIM-N* Wireless Interface Module (WIM) provides a wireless
communications interface between a Pocket PC, laptop computer or
desktop computer equipped with Bluetooth wireless technology and any
Allen-Bradley product supporting DPI. The WIM uses the full-duplex
DF1 protocol
.
Important: The WIM also supports legacy Allen-Bradley AC drives
that use the SCANport protocol.
Figure 1.1 Components of the WIM
Topic Page
Components 1-1
Features 1-2
Compatible Products 1-2
Required Equipment 1-3
Safety Precautions 1-4
Quick Start 1-5
Status Indicator 1-6
Components
Contains FCC ID: SNT-2XWIMNX
IC: 5450A-2XWIMNX
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired operation
➊
(NEMA 1 WIM shown)
Item Part Description
➊
Status
Indicator LED that indicates WIM
operation, when data is being
received from the Bluetooth
wireless technology enabled
Pocket PC or computer, and
when data is being sent to
the Pocket PC or computer.
Refer to
Status Indicator on
page 1-6 , and Chapter 4 ,
Troubleshooting for more
information.