Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 182)

182 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 12 Monitor Status and Handle Faults
03D0 Ethernet Basic Setting 01: Ethernet Setting error 01: Checksum error F2<->n4
11: Inconsistent setting
12; Specified baud rate is not
supported
02: TCP/IP Basic Setting error 01: Checksum error
11: Invalid IP address
12: Invalid subnet mask
13: Invalid default gateway address
14: Invalid primary name server
15: Invalid secondary name server
16: Invalid domain server
17: Invalid host name
03D5 Tag Data Link 00 Lower byte of IP address L9<->n4
03D3 Link OFF 00 00 E1<->n4
(1) The first byte combined with the second byte appear as a single, 4-hex character in the Detailed Information column under the EtherNet/IP Error History tab. Refer to the dialog box in the Display the
EtherNet/IP Error History Table for the 1752-L24BBBE Controller section for examples.
Error Code Error Detail Code 7-segment Display
1st Byte
(1)
2nd Byte
(1)