Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 99)

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 99
Configure Your Controller for DeviceNet Communication Chapter 7
Adding the SmartGuard Standard Slave to the Standard Master’s
Scanlist
To make the standard slave I/O assemblies available to the standard master, add
the SmartGuard standard-slave controller to the master’s scanlist.
Refer to the user documentation for your standard master for information on
configuring your specific device.
Save your configuration in RSNetWorx for DeviceNet software by choosing
File>Save.