Rockwell Automation Logix5000 Logix5000 Controllers Quick Start - Manual (Page 88)

88 Publication 1756-QS001E-EN-P - October 2009
Chapter 5 Program a Project Offline
Enter an SFC
1. Drag elements from the toolbar to the chart.
• A green dot shows a point to which the element will automatically connect if you release the mouse
button.
• Some toolbar buttons are active only after you select a corresponding element on the SFC. For
example, to add an action, first select a step.
• Drag an action until it is on top of the required step and then release the mouse button.
2. To manually connect elements, click corresponding pins. A green dot shows a valid connection point
3. To enter structured text, double-click a ? symbol. Then type the structured text and press Ctrl + Enter.