Desirable copy cannot be made, Basic features, Stamp – Sindoh N700 User Manual
Page 115: Combine/duplex, Stam
2-
39
Copy Features
2
Desirable copy cannot be made
The causes and solutions for the undesirable copies are described below:
Basic Features:
Status
Cause
Solution
Staple is not made.
A staple in the stapler sticks
to.
Remove the stuck staple.
Paper is bent.
Set the paper inside out.
Staple position is wrong.
Original position and selected
staple position does not
match.
Check the original position.
See
Pages in Series are
sorted.
Pages in Series are output due
to full memory during the job.
You can set up Copy Stop
when memory is full.
See
In Staple printing, paper
is not output.
When stopped the print in
Staple printing, the paper
without staple in printing is
remaining in the staple unit.
Remove the paper from the
Finisher.
Stamp
Status
Cause
Solution
Stamp is not made in the
desired position.
Original position is wrong.
Set up and modify Original
Position and Stamp Position.
Combine/Duplex:
Status
Cause
Solution
Image is cut in Combine,
or Margin appears.
Original size, Reduce/Enlarge
ratio, and paper are not
combined with.
Auto Reduce/Enlarge allows to
copy by the reproduction ratio
to fulfill the original and the
copying paper.
- Copy can be made by
selecting the reproduction
ratio and setting Combine.