Replace the toner unit, Replacement method, P. 9-3 replace the toner – Sindoh N700 User Manual
Page 287: Toner. for toner unit replacement, see, P. 9-3 「replace the toner unit
9-
3
Maintenance and Troubleshooting
9
Replace the Toner Unit
When the toner almost uses up, a message of “low toner” is shown on the LCD.
Even if the Machine may continue to use, please replace it with a new toner unit as soon as
possible.
If a message of “No toner: replace the toner” is show on the LCD, printing cannot be made any
more since the toner used up. Replace it with a new toner unit.
Replacement method
Important
- Before installing the new toner unit, shake it 5 ~10 times.
- Keep the used-up toner unit in the package box since it will be collected by your service
center.
Caution
- Do not burn the used toner unit or discard on fire. Scattered toner may cause a burn.
- Avoid your hands, clothes, or the Machine inside being stuck with toner. When toner stuck
onto your hands, wash it off with clean water or mild cleaning fluid.
- When toner got in your eyes, wash it off with clean water immediately and then see a
doctor.
1
Open the Front Cover: