Sindoh N700 - Manual (Page 214)

Setting
6-
8
4
Select the setting Item and press the desired setting:
For detailed Settings, see “Network - detailed description”below.
5
After finishing the setting, press [Confirm].
To cancel the setting, press [Cancel]:
Network – detailed description
Feature Description Set point
1.1-Machine
IP Address Select either Auto-Obtain or Manual Input.
In selecting Manual Input, the user can change
the IP address to use. To boot over the Network
with the set point, press [OK] or 1.4-Connect”. * Auto-Obtain (DHCP)
Specify
IPv4
Subnet mask
Gateway
DNS Server 1
DNS Server 2
1.2-Machine
IPv6 Address IPv6 address