Sindoh N700 - Manual (Page 125)

3-
9
FAX Features
3
2
Set the original on the Flatbed or the ARDF.
- When transmitting the original on the Flatbed, check that no original shall be set on
the ARDF.
3
Pressing [Redial] allows previsouly dialed FAX No. to be shown on the Send To list.
If the finally sent Fax was transmitted to several receivers, the phone number of the last
receiver is shown on the Send To list:
4
Press 【 】 Key.
5
Scan the original and start transmission.
- To cancel Fax Transmission, return to the start-up screen and move to PRINT/JOB LOG.
Then, press Fax in the Job list and press [Reset Job].
- A message confirming Cancel Fax, “Are you sure you want to reset job?” will be shown
on the screen.