Dell POWERVAULT MD3620I - Manual (Page 58)

Figure 56. Create Virtual Disk Copy Dialog
3. Click Next to select the target virtual disk for the virtual disk copy and select the copy priority to use.
Figure 57. Virtual Disk Copy Target Dialog
After the virtual disk copy is established, it can be managed from the Virtual Disk Copy tab. To stop a copy
operation that is occurring, select the copy set to modify and click Stop. To recopy an existing virtual disk, click the
copy set and click Recopy. To delete a copy set, select the copy set to modify and click Remove Copy. This removes
the virtual disk copy relationship between the two virtual disks, but does not modify or delete the target virtual disk
that still contains a copy of the original data from the source virtual disk.
Changing Virtual Disk Copy Parameters
To change the target virtual disk to read-write or change the modification priority:
1. Select an existing volume copy from the list.
2. Click Change Virtual Disk Copy Parameters.
3. From the Copy Priority drop-down box, select the new priority for the virtual disk copy.
58