Creating replicated pairs – Dell POWERVAULT MD3620I User Manual
Page 64
Creating Replicated Pairs
You cannot create a replicated pair with a virtual disk that is already in a replication relationship. To create a replicated
pair:
1.
In the All Storage Arrays table, select the storage array in which to create a mirrored pair.
2.
In the Remote Replication Groups table, select the group in which to create a replicated pair.
3.
Click Create Replicated Pair.
The Create Replicated Pair dialog is displayed.
Figure 64. Create Remote Replication Pair Dialog
4.
From the Remote Replication group drop-down list, select a group name.
5.
From the Select a primary virtual disk drop-down list, select the primary virtual disk for the replicated pair.
6.
Click Next.
7.
From the Select a secondary virtual disk drop-down list, select the secondary virtual disk for the replicated pair.
8.
Select Finish.
The Remote Replication Groups table shows the status of the group as Initial Sync.
The Replicated Pairs table does not show the virtual disks in the replicated pair. To show virtual disks, select the
Remote Replication group in the Remote Replication Groups table.
Figure 65. Initial Sync Status Remote Replication Groups and Replicated Pairs Table
64