Dell POWERVAULT MD3620I - Manual (Page 7)

1
Overview
The Dell PowerVault MD Storage Array vCenter Plug-in allows integrated management of Dell MD-series storage arrays
from a VMware vSphere client. Enabling a single vSphere-based management interface eliminates the need to install,
maintain and learn to use proprietary storage array-based management tools. Using the MD vCenter Plug-in, an
administrator can:
• Configure ESX/ESXi hosts to connect to MD storage arrays
• Create, map, and delete virtual disks (both standard and from unconfigured space in a previously created disk
pool)
• View the vCenter datastores available to the MD storage array's virtual disks
• Create legacy or point-in-time snapshots, virtual disk copies, and Remote Replication between arrays (if
premium features activated)
The MD vCenter Plug-in uses an application server interface between the vSphere Client and MD storage array and fully
supports role-based user authentication.
NOTE:
The MD vCenter Plug-in requires that a vCenter Server be installed.
Figure 1. MD vCenter Plug-In In a VMware Environment
Installation Prerequisites
The MD vCenter Plug-in requires the following:
• VMware vCenter Server 4.1, 5.0 or 5.1 (installed on host server)
• One of the following servers operating systems to host the application server:
– Windows 2003 Server with Service Pack 2
– Windows 2003 R2 Server
7