Switchviolation – Dell POWEREDGE M1000E User Manual
Page 977
Fabric OS Command Reference
945
53-1001764-02
switchViolation
2
switchViolation
Dumps the DCC violations for a switch.
Synopsis
switchViolation --dump -dcc
Description
Use this command to display all Device Connection Control (DCC) violations that have occurred on
a switch. Internally the command searches "errdumpall" for the DCC violations. For each DCC
violation, the command displays the device WWN and the port where the violation occurred.
Notes
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
This command can be executed on both active and standby CPs. This command does not support
High Availability (HA).
Operands
This command has the following operands. If executed without operands, the command prints the
usage.
--
dump
Displays specified policy violation.
-dcc
Specifies the violation type as DCC.
Examples
To display DCC violations for a switch:
switch:admin>
switchviolation --dump -dcc
Device WWN Port
-----------------------------------
22:00:00:04:cf:75:59:87 10
See Also
none